When your water heater gives out, you usually have to choose a new one fast. One of the first questions is whether to go with gas or electric. Both deliver reliable hot water, but they differ in price, speed, and installation needs.
This guide from ARS®/Rescue Rooter® gives you the verdict first, then a side-by-side comparison so you can see which type fits your home. If you're ready to talk options now, our water heater replacement services start with an upfront written estimate. Call Today at 866-399-2885.
The Quick Verdict: Gas or Electric?
A gas water heater is usually the better fit if your home already has a gas line and your household uses a lot of hot water. An electric water heater is usually the better fit if you don't have gas service, have a smaller household, or want a simpler, lower-cost installation.
For most homeowners, the simplest answer is to stay with the fuel type you already have. Switching adds gas line or electrical work, and that extra cost often outweighs the benefits.
The choice matters because water heating is a real part of your budget. According to the DOE water heater standards announcement, "Water heating is responsible for roughly 13% of both annual residential energy use and consumer utility costs."
Gas vs Electric Water Heater Comparison Table
Here's how standard tank models compare on the factors homeowners ask about most.
| Factor | Gas Water Heater | Electric Water Heater |
|---|---|---|
| How it heats | A burner under the tank uses natural gas or propane | Electric heating elements inside the tank |
| Upfront installed cost | Usually higher (venting and gas line work) | Usually lower (simpler install) |
| Monthly operating cost | Often lower where natural gas is cheap | Often higher where electricity is expensive |
| Hot water recovery | Faster | Slower |
| Energy efficiency | Loses some heat through the vent | Turns nearly all its energy into heat |
| During a power outage | Pilot-light models may keep working | Stops heating |
| Installation needs | Gas line, venting, and code requirements | Dedicated 240-volt circuit |
| Maintenance | Tank care plus burner and vent checks | Tank care plus occasional element replacement |
| Safety | Requires proper venting to prevent carbon monoxide | No combustion, so no carbon monoxide |
How Each Type Works
Both types store water in an insulated tank and keep it hot until you need it. The difference is how they create the heat.
How a Gas Water Heater Works
A gas water heater has a burner at the bottom of the tank. The burner runs on natural gas or propane and heats the water from below.
The burner makes exhaust, so the unit needs a vent pipe (also called a flue) to carry those gases outside. Some heat escapes through that vent, which is why gas models are rated as less efficient than electric ones.
How an Electric Water Heater Works
An electric water heater uses metal heating elements, usually one near the top and one near the bottom of the tank. Electricity flows through the elements and warms the water around them.
There's no flame and no exhaust, so almost all the energy goes straight into the water. Most standard electric models need a dedicated 240-volt circuit, which is the same type of high-power circuit used by an electric dryer.
Cost: Upfront Price vs Monthly Bills
Cost comes in two parts: what you pay to install the unit, and what you pay each month to run it. Gas and electric often trade places on these two numbers.
According to ARS national service data, a standard tank water heater replacement typically ranges from about $2,300 to $3,500, depending on capacity and installation requirements. Gas installs often land on the higher end because of venting and gas connections. For a full breakdown of what drives the price, see our guide to water heater replacement cost.
Monthly costs depend on your local utility rates. In areas where natural gas is cheap compared to electricity, a gas unit may help lower your monthly bills. In areas with low electric rates, an electric unit can be just as affordable to run.
Performance, Efficiency, and Recovery
"Recovery rate" means how fast a water heater can reheat a tank after you've used the hot water. Gas models usually recover faster, which helps when several people shower back-to-back or the dishwasher and washer run at the same time.
Electric models win on efficiency because they waste very little energy. But efficiency doesn't always mean a lower bill. If electricity costs much more than gas where you live, a less efficient gas unit may still cost less to run.
Installation, Maintenance, and Safety
Beyond cost and performance, each type comes with different setup and upkeep needs. These are worth weighing, especially in older homes.
What Installation Requires
A gas water heater needs a properly sized gas line and a venting system that meets local code. If your home already has both, swapping in a new gas unit is usually straightforward.
An electric water heater needs a 240-volt connection on its own circuit. In some older homes, that may mean added wiring or panel work from our home electrical services team.
Maintenance Needs
Both types benefit from the same basic care. Check these regularly:
- Tank flush: Draining the tank about once a year helps clear sediment that can make the unit work harder.
- Anode rod: This metal rod helps protect the tank from rust and wears down over time.
- Pressure relief valve: Testing this safety valve helps make sure it opens if pressure builds too high.
Gas units also need their burner, gas connections, and vent checked. Electric units may need a heating element replaced at some point. Routine plumbing preventative maintenance can help catch small problems early.
Safety Considerations
Gas water heaters burn fuel, so venting has to work correctly. The EPA carbon monoxide guidance notes that "Carbon monoxide is an odorless, colorless and toxic gas," and it lists back-drafting from gas water heaters as one source.
If you have any gas appliances, working CO alarms are a must. Our team handles carbon monoxide detector installation if you need them. Electric water heaters don't burn fuel, so they don't produce carbon monoxide.
When Each Type Fits Best
The right choice comes down to your home's setup, your household's hot water use, and your local energy prices. Here's how to match each type to your situation.
When a Gas Water Heater Fits
- You already have gas service: A like-for-like swap avoids new gas line and vent work.
- Your household uses a lot of hot water: Faster recovery helps busy mornings run smoothly.
- Natural gas is cheap where you live: Lower fuel costs may help offset a higher install price.
- You lose power often: Models with a standing pilot light may keep heating during an outage.
Gas access depends a lot on where you live. Based on EIA natural gas use data from 2020, "The Midwest and the West had the highest shares of households using natural gas for space heating (70% and 60%) and water heating (60% and 64%)." In the South, only 31% of households used natural gas for water heating.
When an Electric Water Heater Fits
- Your home has no gas line: Electric avoids the cost of running new gas service.
- You have a smaller household: Slower recovery is less noticeable with lighter hot water use.
- You want a simpler install: No gas line or vent pipe is needed.
- You prefer no combustion: There's no flame and no carbon monoxide.
Should You Switch From Electric to Gas (or Gas to Electric)?
Switching fuel types is possible, but it adds work. Going from electric to gas means running a new gas line and adding venting. Going from gas to electric may require a new 240-volt circuit or panel work.
Switching usually makes sense only when you have a strong reason, like a large household that needs faster recovery or a planned move away from gas. If you're thinking about adding gas, our gas line service team can look at what your home would need before you commit.
Other Options to Consider: Heat Pump and Tankless
Gas and electric tanks aren't your only choices. Two other types are worth a look.
A heat pump water heater is an electric model that pulls heat from the surrounding air instead of making heat directly. ENERGY STAR estimates that certified models "can save a household of 4 approximately $550 per year on its electric bills compared to a standard electric water heater," according to its ENERGY STAR heat pump savings page. They cost more up front and need enough space and airflow around the unit.
A tankless water heater heats water only when you turn on the tap, and it comes in both gas and electric versions. ARS service data shows tankless installations typically run about $4,400 to $6,500, depending on unit type and installation complexity. Learn more about tankless water heater installation.
How to Tell Which Type You Have and When to Replace It
Not sure what you have now? A gas water heater usually has a metal vent pipe on top and a gas line with a shutoff valve near the bottom. An electric unit has a thick electrical cable at the top and small access panels on the side for the heating elements.
As a general guideline, plan to replace a water heater every seven to eight years, though this varies with usage, water quality, maintenance history, and installation quality. Watch for these signs:
- Rusty or discolored hot water
- Rumbling or popping noises
- Leaks or moisture around the base
- Hot water that runs out faster than it used to
ARS recommends a simple rule: if a repair would cost more than half the price of a new unit and the water heater is over 10 years old, replacement usually makes more financial sense. Our guide on whether to repair or replace your water heater walks through the decision.
When to Call a Professional
If your water heater is leaking, making loud noises, or running out of hot water early, it's time for an expert look. A gas smell near your water heater is an emergency, so leave the area and call your gas utility right away.
Our trusted ARS team can help you compare gas and electric options for your home and give you an upfront written estimate before any work begins. Emergency services are available, and our team is available seven days a week. Call Today at 866-399-2885 or Schedule Service Online.
Frequently Asked Questions
It depends on your local utility rates. Gas is often cheaper to run month to month where natural gas costs less than electricity, while electric units usually cost less to install.
Not nationally: gas models are still widely installed, and in 2025 the DOE confirmed that its December 2024 standards for gas tankless models "shall have no force or effect," according to the DOE gas tankless withdrawal notice. Some states and cities have their own rules, so check local codes before you buy.
Gas models with a standing pilot light can often keep heating during an outage. Many newer gas models use electronic ignition or controls, which may stop working when the power goes out.
No, the federal energy-efficient home improvement credit has ended, and the IRS energy credit FAQs state that "The credit will not be allowed for any property placed in service after December 31, 2025." Your utility or state may still offer rebates, so check with them before you buy.
Gas water heaters usually recover faster than electric models. That makes gas a common choice for larger households with high hot-water demand.